Backwashing instructions

How to ...

Your filter will require regular backwashing. The filter must be backwashed when the pressure gauge indicates 30 – 40 kPa higher than at normal start-up pressure ( start up pressure to be determined just after pool is backwashed). Please follow the steps below.

• Turn pump OFF
  Pump must always be off when changing handle position.




• Clean pump strainer basket if necessary




• Move valve handle to BACKWASH position




• Turn pump ON and run for 90 seconds or until water is clear in sight glass.




• Turn pump OFF.




• Move valve to RINSE position.




• Turn pump ON and run for 20 seconds.




• Repeat the previous steps.




• Turn pump OFF and move valve to FILTER position.




• Run pump on normal filtration cycle.

Please contact your dealer with any questions relating to your Barramundi Freshwater Swimming Pool system. Pool shops supplying non-Barramundi systems do not have the experience to advise you correctly.